Suitable:
Raw materials for pharmaceuticals and other organic sulfur, halogen composition analysis
Plastic sulfur, chlorine, fluorine, bromine content analysis
Epoxy chlorine analysis
Industrial paper sulfur, chlorine, bromine analysis
Lubricant Chlorine Analysis
Soil fluorine, bromine, iodine analysis
Technical Features
Ideal sample boat control and double-pipe combustion.
Minimum 5 minutes to the end of combustion.
Do not like the traditional method (oxygen BOM law, Flask Combustion Method) special treatment
Just set the combustion, the absorption conditions, simple operation
High sensitivity analysis
Low empty gas control unit, low gas blank, true.
High purity quartz tube for analysis, so the sample can be analyzed correspond to a very small amount.
Fully automatic measurement
Select the external fluid and the sample changer combination of combustion measurement and sample measurement standard curve can do automatic.
Automatic sample combustion device standard
Standard
Sample introduction mode
Sample boat autosampler (using automated sample boat controller)
Measurement object
Solid sample, the sample liquid
Sample size
Solid samples: 1 to 150 mg; liquid sample: 5 ~ 100μl
※ different samples.
Combustion tube
High purity quartz
Burner
Maximum 1100 ℃
The required gas
Argon :( purity above 99.98 30%, 0.3 ± 0.1 MPa)
Oxygen purity 99.7 :( 30% or more, 0.3 ± 0.1 MPa)
Measure
Loop measurement methods
Piping
Fluorine resin tube, PEEK tube
Export
Signal the start of an ion chromatograph data processing (contact)
power supply
HF - 210: AC 100/115/230/240 V, 50 / 60Hz 1000 VA
GA - 210: AC 100/115/230/240 V, 50 / 60Hz 50 VA
Size, quality
HF - 210: approximately 320 (W) × 430 (D) × 500 (H) mm, approximately 25 kg
GA - 210: approximately 250 (W) × 430 (D) × 500 ((H) mm, approximately 22 kg
Options
Solid with an automatic sample changer
ASC - 240 S
Automatic sample boat Controller
ABC - 210
External fluid selector
ES - 210
Tech Support
User Reviews
